There are many advantages to DIY artificial turf installation, but there are also some disadvantages to it. The wrong measurements can cause drainage problems, uneven surfaces, and weeds. You can also mess up the entire yard by incorrectly measuring the area. To avoid these problems, hire a professional to lay the turf. In the end, the result should be as good as a professional installation, but it will cost you less money. Here are some tips to follow when performing your own installation:
Before installing the artificial turf, spread road base over the area with a wheelbarrow. This will form a level foundation for the turf. The road base should be angled towards the drains to prevent water from pooling. Make sure that you secure it with pegs at the corners, edges, and seamed areas. This will prevent rips from pets and heavy-duty wear and tear. In addition, make sure to securing the turf will prevent it from being damaged by vehicles.
If you’re experienced in general landscaping and DIY projects, you can save a lot of money by installing your own turf. Besides turf, you’ll need some tools and supplies, such as base rock, infill, and turf glue. You’ll also need rakes and seam tape. You can buy turf on your own, but hiring a professional can be a hassle. If you don’t feel confident with your hands, consider hiring a landscaping professional.
To install your own artificial grass, you’ll need to start by making sure that you’ve chosen the right size. The right size for your area depends on how wide it is. If you don’t have a level space, you’ll have to resize the turf to fit it. You may have to add dirt or use a weed barrier. If the area is steep, you can install the artificial turf on top of a slight slope.
Before installing the artificial turf, prepare the soil. You may also need supplies to remove weeds and grass. Make sure to prepare the soil beforehand by digging three inches deep. If the soil is hard, rocky, or heavily rooted, it’s difficult to work with. If there are any tree roots or irrigation lines, this can be a huge obstacle. In this case, you’re best off hiring a contractor. And remember, DIY artificial turf installation is not always a good idea.
Once you have the turf cut to size, you can then seam them together. To avoid having a seam visible, make sure you use professional adhesive and a utility knife. If you’re working with more than one piece of turf, don’t forget to leave extra turf at the edge for seaming. You should also allow for extra seams for a clean border. Finally, join two rolls of turf with tape or adhesive. You can also brush the tufts to blend. If you’re doing it yourself, don’t forget to follow these basic steps.
When installing DIY artificial turf, remember to follow the correct installation technique. If you are unsure of the exact techniques, ask a professional. Most companies use professional installers. They know all the steps, but it’s still better to have someone who knows what they’re doing. You can also get help from online guides. They’ll help you install artificial turf in the best way possible. You’ll need to follow these tips to install the artificial grass the right way.
